I wonder if it would be worthwhile to colocate large greenhouses with datacenters. The exhaust temperatures seem compatible with hothouse growing. The heat would still end up in the atmosphere, but at least it could enable growth of fresh local produce first.
American chestnuts will die here, but I have a magnificent large Chinese chestnut tree in my yard. It’s not the same, but at least we get to harvest some 10-15 gallons of chestnuts every fall.
And you hitting submerged objects that aren’t flowing. I remember cutting my hand on a rock while going through rapids with a life jacket on. You need to practice keeping your feet downstream when in whitewater conditions.
Salary also can’t be exempt from overtime if the salary works out to less than minimum wage for the hours worked. So only 2080 of the 6000 hours could be minimum wage and the other 3920 would be paid at time and a half.
Are you familiar with the difference between polar (r, theta) coordinates and cartesian (x,y) coordinates? Parabolas are the solution to gravity that is uniform no matter where you sample. It assumes that gravity points in the same direction with the same magnitude no matter where you are. In this model, gravitational acceleration is always 9.81 m/s^2 in the -y direction. That is a reasonable simplification for things that are at the human scale constrained to near the earth’s surface. Deviations from air resistance will matter far more than errors stemming from that assumption anyway.
Conic sections are the solutions to gravity that is between two objects where the force is along the line between the center of mass of both objects and the strength is inversely proportional to the square of separation. Now you need polar cpordinates and the direction of gravity changes as things move around. This works pretty well for orbits around the earth and orbits around the sun, because the earth is so much more massive than sattelites that orbit it, and the sun is so much more massive than things that orbit it. If you need really precise orbit trajectories, ellipses aren’t truly accurate either. You need to account for all the orbiting bodies in the system. The 3-body problem famously doesn’t have purely analytical solutions, and you need to resort to numerical methods to calculate trajectories.
So both solutions come from simplified mathematical models. Despite being simplifications, their predictive power is actually very goood. However, like you are intuiting, it’s important to know when those simplifying assumptions lead to errors that start to become important. It’s hard to come up with a particular threshold for when you need to switch from one model to another, because it really depends on how much accuracy your application needs.
I did search for “weather on the way” in google play store. While they don’t have an android app, I found two similar apps that do a lot of what I wanted: “drive weather” and “highway weather.” Thank you for the search term that yielded results. I like that the"highway weather" app allows adding in rest stops and propagates the change into the forecast.
I will note that neither of these options seem to offer turn by turn navigation. So there is still room for some of the navigation apps to integrate this functionality.
I have long wanted a weather forecast along route in navigation apps for long trips. Ideally you could add in stops and estimate how long you would need to wait for storms to pass over.
I don’t have information specific to midea, so there is some speculation, but I do have a ge unit which does outright say that the water condensate is slung across the condenser coil to boost efficiency. And yes, my ge unit got really nasty and I ended up drilling a hole in the base of the condensate pan to drain all the water.
https://products.geappliances.com/appliance/gea-support-search-content?contentId=16758
Heat pump efficiency is limited by the temperature delta across the compressor. The larger the temperature delta, the less efficient a heat pump is. Evaporating water off the condenser coil drops the refrigerant temperature compared to air only and gives a small boost to efficiency. I don’t think it’s a big difference, but it’s enough to be worthwhile doing if you can “get it for free.” Unfortunately, a constantly cool and wet pool is a great breeding ground for mold and pathogens that you don’t want airborne.
As for cleaning ease, I based that off of comments (on reddit I think), recommending people push midea to pay for a technician to perform the fix because taking it apart for a thorough cleaning is a hassle. So I have no firsthand experience there and I’ll defer to your judgement.
I don’t have one of that type, so I haven’t contacted them. I was thinking about getting a unit like that, but then found out why they weren’t in stock anywhere.
I think the lack of drain was intentional so that the water wiuld splash up on the condenser coil. An AC unit generates a lot more water than a refrigerator though, so I think any design with a condensate basin below the condenser coil will have mold problems. The other issue is they didn’t make the unit very serviceable, so opening it up to clean out mold sounds like a huge hassle. Draining the water away will mean the units won’t be as efficient as originally designed, but mold can be a major health hazard.
The U shaped units manufactured by midea were all recalled and are not currently available for sale.
You might want to look up the recall and get the repair kit. They were recalled for excessive mold build up.
This is an x-y problem. You are asking about methods of placement when your actual concern is methods of accountability. Choosing someone else in the next election isn’t accountability, it’s a flimsy escape mechanism. Both methods of placement won’t be able to correct for a bad actor without further protections from independent/external authority.
I like the Beko we got a few years ago. They compete well with Bosch.
My ribcage rests on a memory foam pillow. My head rests on a buckwheat pillow. My arm goes in the gap between the two pillows. The buckwheat pillow is easily remoldable so my arm can go underneath and find a good angle without making my head feel unstable.
Ironically, high end cards usually only have small penalties for having a previous gen PCIe. On a full x16 lanes, there’s usually bandwidth to spare. Although you wouldn’t want to put a RTX 5090 on PCIe 3.0. It was the RX 6500 XT with its mere x4 lane count that took a significant hit running on PCIe 3.0 instead of 4.0. That was not a good limitation for that market segment since the low end is where people are most likely to try to avoid upgrading motherboards/cpus.
I had a neighbor who was rather compulsive about her yard. She would mow her yard/have it mowed 2-3 times a week and would use a leaf blower to push the grass clippings onto her neighbors yard every time. She would also leaf blow her roof with surprising frequency.
I gotta say, I was a little relieved when I saw the for sale sign in the yard earlier this year.
The soil type you describe is what is usually recommended. I have a lot of clay in my soil so I planted my bushes on a slope that is too steep to mow. That seems to provide enough drainage. They did have a brief fungal infection on their second year, I treated with sulfur powder and haven’t had any problems in subsequent years. A cheap pH meter says my soil is around 5, but I don’t put a lot of confidence in its measurements.
The flowers are also beautiful and have a pleasant aroma.
The time to stop fighting was after the recount. This guy sued to throw out legitimate ballots based on baseless claims about verifying id. He has no moral fiber. This is just an acknowledgement that the efforts to steal the supreme court seat were causing more damage to the NC GOP than what suceeding would benefit them.
Will Forte. His voice and “quirky” style I find just irritating and not at all amusing.