For me, it was buying CA glue from hobby or woodworking shops instead of those tiny packs of “superglue”. Comes in all different thicknesses and with activator usually for a lower cost per gram, and in bottles designed to last until the glue is gone.
I’m sure brand also plays a role. The three adhesives I use the most, both at home and at work are superglue, epoxy, and threadlocker. And I always use Locktite brand for all three (well, 7 if you count the different strengths of threadlock)
The only downside is that every time I go to use it, it starts expanding as it heats up and ends up dripping out of the nozzle even when I’m not squeezing it.
Nothing a bit of paper towel can’t fix but it can become a bit messy.
Haven’t tried the cap less ones, but wouldn’t surprise me if it also works, at least to a limited degree. Super glue cures because of the moisture in the air, and cold environments are very poor at holding moisture.
Same, but I started buying larger ones after it stopped going bad due to the fridge. Most toy repair in my household are usually done with superglue, epoxy, or solder, all of which last forever here. And failihg those, printing a new part is usually an option here.
Storing superglue in the fridge. Those tiny packs now actually last until I’ve used it all.
For me, it was buying CA glue from hobby or woodworking shops instead of those tiny packs of “superglue”. Comes in all different thicknesses and with activator usually for a lower cost per gram, and in bottles designed to last until the glue is gone.
I’m sure brand also plays a role. The three adhesives I use the most, both at home and at work are superglue, epoxy, and threadlocker. And I always use Locktite brand for all three (well, 7 if you count the different strengths of threadlock)
I store it in the freezer and it lasts forever.
The only downside is that every time I go to use it, it starts expanding as it heats up and ends up dripping out of the nozzle even when I’m not squeezing it.
Nothing a bit of paper towel can’t fix but it can become a bit messy.
Now there’s a tip! Hang on walking to my fridge.
Bonus nugget: Store it in the door, next to the mayonnaise. It may not matter, but that’s what I (happen to) do, and it works like a charm.
Crossing into superstition a little maybe, but why not.
Wait… even after you open it? The ones without a cap?
Haven’t tried the cap less ones, but wouldn’t surprise me if it also works, at least to a limited degree. Super glue cures because of the moisture in the air, and cold environments are very poor at holding moisture.
I’ll give it a go. I buy the “single serving” glue because I’m always repairing kid toys, and I hated how it went bad so quickly.
Same, but I started buying larger ones after it stopped going bad due to the fridge. Most toy repair in my household are usually done with superglue, epoxy, or solder, all of which last forever here. And failihg those, printing a new part is usually an option here.
If you don’t feel like modeling and printing a part, have you tried epoxy putty?
It’s great for fixing complex molded shapes, like play dough that hardens to plastic.